Automatic SMT machine operation

1. Automatic SMT machine appearance 
2.FPC Plate 
3. Placed FPC on the loading area, notice the FPC tail and the direction of the magazine arrow
4.Ensure the height of nozzles can’t lower than 24mm  
5.Click on singlestep operation , start running 
6.Confirm the adsorption s uction nozzle position 
7. Confirm the position of the chip, the FPC tail can not be on the carrier ribs, must all be laminated on the hightemperature tape above to avoid water stains, dirt residue on the enhanced chip, causing bad 
8. After the Finish production, all the module reset need to pay attention to the location of the loading plate. 9. The inner edge of the loading plate to the FPC board scraping glue area is greater than 3mm